PET BLUE HOLDING TAPE

 Egret so-called blue PET tape or blue holding tape is used a lot for refrigerators or coolers. It has both blue color and transparent color. Normally is coated with natural rubber glue or solvent based acrylic adhesive. Plus, the pet adhesive tape has no liner. The base material is polyester. The material has very high tensile strength and low elongation, not stretchable, and hard to tear. Because of this feature, it is suitable for temporarily holding the plastic or metal parts without moving. In the meantime, after you remove the tape, it has no glue residue on the surface. On the other hand, blue color is easy for you to recognize. Silicon coating on the back side is easy for you to release.

 

PET Blue Holding Tape Specifications

Product Characteristics

Performance Data

Test Method

PET Film Thickness

36 micron (1.4 mil)

PSTC-133/ASTM D3652

Adhesive Thickness

25 micron (1.0 mil)

PSTC-133/ASTM D3652

180° Peel Adhesion

12 N/25mm (43.3 Oz/In)

PSTC-101/ASTM D3330

Static Shear

≥24 Hours

GB/T4851-2014

Tensile Strength

75 N/25mm (17.1 Lb/In)

PSTC-131/ASTM D3759

Elongation at Break

140.00%

PSTC-6/ASTM D3121

Service Temp.

-10 ~ 80℃ （14 ~ +176 °F）

 

Operating Temp.

0 ~ +40℃ （32 ~ +105 °F）

 

 

Features of PET Blue Holding Tape

Blue polyester film with high tensile strength

 

With silicone coating on PET non-adhesive side for easy release

 

Tear-resistance is for strong holding

 

Coated with high performance natural rubber adhesive

 

Rubber adhesive has good bonding, removes without residue

 

Blue or transparent color is available

 

Good aging resistance for both indoor & outdoor use

 

After removal, no adhesive residual on surface

 

Process of PET Blue Holding Tape Production

NO.1

First, we will choose 28 mic to 36 mic thickness polyester film.

 

NO.2

Second, we use blue paint to dye the pet film if transparent color, then no need to dye.

 

NO.3

Third, we coat silicon on the back side of PET blue or clear film, to ensure its easy release or unwind.

 

NO.4

Forth, we coat with very high bond natural rubber or solvent based adhesives.

 

NO.5

Finally, we use our lathe slitting machines to cut the jumbo rolls to different standard or nonstandard width and length of small rolls. The jumbo size is 1200mmx1000m.

 

As an adhesive tape factory, we can offer kinds of industrial adhesive tape for sale, if you have needs, please contact us.

 


评论

发表评论

此博客中的热门博文

FSK TAPE

图片
  FSK TAPE FSK tape is short name for foil scrim kraft tape. It is fire resistant, moisture barrier, very popular in thermal insulation industries. It is combination of aluminum foil, brown kraft paper, fiberglass scrims. It can used for wrapping the air ducts and laminating the glass wool or rock wool thermal insulation, duct board joints applications. It is a cheaper solution compared to other reinforced aluminum foil tape . Notably, it attaches well to rigid & flexible air ducts. Also, it is perfect vapor sealing for fiberglass facing joints. In addition, we have 2 way and 3 way directional scrims foil. As a result, it can meet with your variable requirements.   Features of FSK   A luminium T ape 4.8 mil (120 micron) 3 directional foil scrim kraft backing   Coated with aggressive synthetic rubber resin adhesive   Strong adhesion fit for sealing joints/seams of foil/scrim facing   Good at moisture or air penetration resistance   Good aging resist...
阅读全文

PET TAPE

图片
  Egret PET tape uses polyester film as the base material, the back of the base material is coated with release agent, and the front is coated with high viscosity rubber pressure sensitive adhesive. The main colors of products are white and blue. Pet is obtained by transesterification of dimethyl terephthalate with ethylene glycol or esterification of terephthalate with ethylene glycol to synthesize dihydroxyethyl terephthalate, and then polycondensation reaction. PET adhesive tape has good physical and mechanical properties in the temperature tolerance range, and the long-term temperature can reach 120°. Short-term temperature can reach -20°. The PET industrial adhesive tape has the characteristics of fatigue resistance, friction resistance and dimensional stability. Crystalline saturated polyester, milky white or light yellow, highly crystalline polymer, smooth and shiny surface, is a common resin in life.   Types of PET Tape There are 4 main PET tapes, including PET blue ho...
阅读全文

PO HOT MELT ADHESIVE FILM

图片
  The main component of Po hotmelt film  is PO, which is called polyolefin in Chinese. It is known to include polyethylene and polypropylene. Polyethylene is tasteless, non-toxic, has low-temperature resistant, and good chemical resistance. It can be polarized by graft copolymerization with other acids, thus changing the bonding properties. Polypropylene is divided into isotactic polypropylene C, interacted polypropylene, and random polypropylene, and used for hot melt adhesive base material for random polypropylene.   The po film belongs to the medium melting point of hot melt film, melting point is about 110℃. PO hot melt film has high transparency, all models of products under it are relatively good low-temperature resistance, and high-temperature resistance is general.   Features of PO Hot Melt Adhesive Film Material: PO film   PO backing with high tensile strength   By heating & blow molding, formulate adhesive film   Excellent elongation ...
阅读全文