POLYETHYLENE TAPE WHITE
Egret so-called white polyethylene tape is used a lot for refrigerators or coolers. Normally is coated with natural rubber glue or water based acrylic adhesive. Plus, it has no liner. The base material is polyethylene. The material has very high elongation rate, extremely stretchable, and easy to tear. Because of this feature, it enables to stretch and conform to irregular surfaces.
Important to realize, it normally can take place pure aluminum foil tape, to attach the cooling tubes. Compared to aluminum foil tape, the cost of PE white tape is lower. On the other hand, white color is easy for you to recognize. Silicon coating on the back side is easy for you to release.
Polyethylene Tape White Specifications
Properties | Data | Test Method |
PE Film Thickness | 60 microns (2.4 mil) | PSTC-133/ASTM D3652 |
Glue Thickness | 20 microns (0.8 mil) | PSTC-133/ASTM D3652 |
Peel Strength (Room Temp.) | 18 N/25mm (64.8 Oz/In) | PSTC-101/ASTM D3330 |
Loop Tack (Steel Ball) | ≥ 10 # | GB/T4852 |
Static Shear | ≥35 Hours | GB/T4851-2014 |
Tensile Strength | 32 N/25mm (7.3 Lb/In) | PSTC-131/ASTM D3759 |
Elongation at Break | 600.00% | PSTC-6/ASTM D3121 |
Urethane Foam Bonding Rate | ≥90% | ASTM D3167 |
Features of Polyethylene Tape White
2.4 mil (60 micron) polyethylene film with high tensile strength
With silicone coating on PE non-adhesive side for easy release
Easy hand-tear or tear-resistance is available according to customer
Flexible PE material enables to stretch and conform to irregular surfaces
PE film color can be white or blue
Coated with high performance rubber adhesive
Natural rubber, synthetic rubber/resin, water acrylic adhesive available
Rubber adhesive has good bonding, removes without residue
Cost-saving alternative for aluminum foil tape in refrigerator application
Good aging resistance for both indoor & outdoor use
PE tape without liner ensures easy operating
Process of Polyethylene Tape White Tape Production
NO.1
First, we will choose 50 mic, 58 mic or 62 mic thickness polyethylene film.
NO.2
Second, we use white paint to dye the pe film.
NO.3
Third, we coat silicon on the back side of PE white film, to ensure its easy release or unwind.
NO.4
Forth, we coat with very high bond natural rubber or water based acrylic adhesives.
NO.5
Finally, we use our lathe slitting machines to cut the jumbo rolls to different standard or nonstandard width and length of small rolls. The jumbo size is 1150mmx1000m.
FAQ of Polyethylene Tape White
What is a white polyethylene tape?
Polyethylene tape white aka polyester tape, high tensile low elongation, smooth and hard film.
01
What is white polyethylene tape used for?
Refrigerator, freezer, cooler evaporative coil/copper tube attachment
02
What is white polyethylene tape made of?
White polyethylene film and rubber or water acrylic adhesive
03
What color of PE tape do you have?
We have white color
We are also one of hvac parts manufacturers, if you want to buy our products, please leave us a message.
评论
发表评论