PURE ALUMINUM FOIL TAPE

 Egret so-called plain or pure al tape, is the most popular and widely used type.

 

And it can divide mainly into 2 types. One is self-wound or without liner, the other is with liner. In the case of no liner, it can reduce cost. And it is suitable for machine use. On the other hand, with liner is suitable for man use. And coat with aggressive solvent or water based acrylic adhesive. Especially, easy tear and easy operate. Moreover, the tape provides flame retardant or high temperature resistant properties.

 

As well as cold weather or low temperature resistant. The application for this tape is mainly used for refrigerator cooling tube attachment.

 

Pure Aluminum Foil Tape Specifications

Product Characteristics	Performance Data	Test Method
Foil Thickness	40 microns (1.6 mil)	PSTC-133/ASTM D3652
Total Thickness	80 microns (3.2 mil)	PSTC-133/ASTM D3652
Peel Adhesion	15 N/25mm (54 Oz/In)	PSTC-101/ASTM D3330
Rolling Ball Tack	5 cm (2.0 Inch)	PSTC-6/ASTM D3121
Tensile Strength	55 N/25mm (10.5 Lb/In)	PSTC-131/ASTM D3759
Elongation	3.00%	PSTC-131/ASTM D3759
Service Temp.	-30 ~ +120℃（-22 ~ +248 °F）
Operating Temp.	+10 ~ 40℃ （+50 ~ +105 °F）
Urethane Foam Bonding Rate	≥80%	ASTM D3167

 

Features of Pure Aluminum Foil Tape

Dead soft aluminum foil backing with high tensile strength

 

Without paper liner to save cost and protect environment

 

Aluminum back coated with easy release agent

 

Coated with aggressive formula emulsion acrylic adhesive

 

With high convective heat transfer coefficient, maximizing cooling efficiency

 

Provide an effective barrier to moisture, air and corrosion

 

Multi-surface grip features, can conform the evaporator coil/cooling tube easily

 

Conform well to contours and irregular surfaces and bonds to most substrates

 

Can be cleanly and easily removed from most surfaces, without any residue

 

Process of Pure Aluminum Foil Tape Production

NO.1

First, we will choose 18 mic to 75 mic thickness pure aluminum, for nonstandard thickness can be up to 150 micron.

 

NO.2

Second, we coat with very high bond solvent based or water based acrylic adhesives, natural rubber or synthetic rubber, hot melt adhesive on the basing material by our glue coating lines. To ensure high foam bonding rate, we also coat special silicone on the back side of material.

 

NO.3

Third, we laminate the liner on the aluminum, no liner is also available.

 

NO.4

Finally, we use our lathe slitting machines to cut the jumbo rolls to different standard or nonstandard width and length of small rolls.

 

The Green Material of Egret's Pure Aluminum Foil Tape

We are highly focused on environmental protection during manufacturing pure aluminum foil tape.

From sourcing material, we adopt odorless pure aluminum, without any poisonous metals, approved by reach and rohs report, ISO 14001. All production departments are equipped with low energy consumption systems and automatic safety and control devices for utmost respect of the environment. We also use water solubility glues, will have no pollution to rivers. All wastage water is collected in special container and send to wastage water treatment factory. All wastage gas is discharge strictly according to local government laws. We spend high money to install special and advanced equipment to collect and discharge wastage water and gas.

 

FAQ of Pure Aluminum Foil Tape



What is pure aluminum foil tape used for?

Attaching cooling tubes before unit foamed or wrapping the condenser tubes. HVAC insulations.

 

01

What is the advantage of pure aluminum foil taper?

High cooling efficiency, soft and more flexible.

 

02

What types of aluminum foil tape do you have?

We have with liner and without liner.

 

03

What kind of glue do you use?

We normally use solvent based acrylic, water based acrylic, and natural rubber.

 

If you are looking for a reliable adhesive tape factory, please contact us, and we will be your best partner.