PURE ALUMINUM FOIL TAPE

 Egret so-called plain or pure al tape, is the most popular and widely used type.

 

And it can divide mainly into 2 types. One is self-wound or without liner, the other is with liner. In the case of no liner, it can reduce cost. And it is suitable for machine use. On the other hand, with liner is suitable for man use. And coat with aggressive solvent or water based acrylic adhesive. Especially, easy tear and easy operate. Moreover, the tape provides flame retardant or high temperature resistant properties.

 

As well as cold weather or low temperature resistant. The application for this tape is mainly used for refrigerator cooling tube attachment.

 

Pure Aluminum Foil Tape Specifications

Product Characteristics

Performance Data

Test Method

Foil Thickness

40 microns (1.6 mil)

PSTC-133/ASTM D3652

Total Thickness

80 microns (3.2 mil)

PSTC-133/ASTM D3652

Peel Adhesion

15 N/25mm (54 Oz/In)

PSTC-101/ASTM D3330

Rolling Ball Tack

5 cm (2.0 Inch)

PSTC-6/ASTM D3121

Tensile Strength

55 N/25mm (10.5 Lb/In)

PSTC-131/ASTM D3759

Elongation

3.00%

PSTC-131/ASTM D3759

Service Temp.

-30 ~ +120℃（-22 ~ +248 °F）

 

Operating Temp.

+10 ~ 40℃ （+50 ~ +105 °F）

 

Urethane Foam Bonding Rate

≥80%

ASTM D3167

 

Features of Pure Aluminum Foil Tape

Dead soft aluminum foil backing with high tensile strength

 

Without paper liner to save cost and protect environment

 

Aluminum back coated with easy release agent

 

Coated with aggressive formula emulsion acrylic adhesive

 

With high convective heat transfer coefficient, maximizing cooling efficiency

 

Provide an effective barrier to moisture, air and corrosion

 

Multi-surface grip features, can conform the evaporator coil/cooling tube easily

 

Conform well to contours and irregular surfaces and bonds to most substrates

 

Can be cleanly and easily removed from most surfaces, without any residue

 

FAQ of Pure Aluminum Foil Tape

What is pure aluminum foil tape used for?

Attaching cooling tubes before unit foamed or wrapping the condenser tubes. HVAC insulations.

 

01

What is the advantage of pure aluminum foil taper?

High cooling efficiency, soft and more flexible.

 

02

What types of aluminum foil tape do you have?

We have with liner and without liner.

 

03

What kind of glue do you use?

We normally use solvent based acrylic, water based acrylic, and natural rubber.

 

For more information about adhesive tape, please feel free to contact us!

 



评论

发表评论

此博客中的热门博文

FSK TAPE

图片
  FSK TAPE FSK tape is short name for foil scrim kraft tape. It is fire resistant, moisture barrier, very popular in thermal insulation industries. It is combination of aluminum foil, brown kraft paper, fiberglass scrims. It can used for wrapping the air ducts and laminating the glass wool or rock wool thermal insulation, duct board joints applications. It is a cheaper solution compared to other reinforced aluminum foil tape . Notably, it attaches well to rigid & flexible air ducts. Also, it is perfect vapor sealing for fiberglass facing joints. In addition, we have 2 way and 3 way directional scrims foil. As a result, it can meet with your variable requirements.   Features of FSK   A luminium T ape 4.8 mil (120 micron) 3 directional foil scrim kraft backing   Coated with aggressive synthetic rubber resin adhesive   Strong adhesion fit for sealing joints/seams of foil/scrim facing   Good at moisture or air penetration resistance   Good aging resist...
阅读全文

PET TAPE

图片
  Egret PET tape uses polyester film as the base material, the back of the base material is coated with release agent, and the front is coated with high viscosity rubber pressure sensitive adhesive. The main colors of products are white and blue. Pet is obtained by transesterification of dimethyl terephthalate with ethylene glycol or esterification of terephthalate with ethylene glycol to synthesize dihydroxyethyl terephthalate, and then polycondensation reaction. PET adhesive tape has good physical and mechanical properties in the temperature tolerance range, and the long-term temperature can reach 120°. Short-term temperature can reach -20°. The PET industrial adhesive tape has the characteristics of fatigue resistance, friction resistance and dimensional stability. Crystalline saturated polyester, milky white or light yellow, highly crystalline polymer, smooth and shiny surface, is a common resin in life.   Types of PET Tape There are 4 main PET tapes, including PET blue ho...
阅读全文

PO HOT MELT ADHESIVE FILM

图片
  The main component of Po hotmelt film  is PO, which is called polyolefin in Chinese. It is known to include polyethylene and polypropylene. Polyethylene is tasteless, non-toxic, has low-temperature resistant, and good chemical resistance. It can be polarized by graft copolymerization with other acids, thus changing the bonding properties. Polypropylene is divided into isotactic polypropylene C, interacted polypropylene, and random polypropylene, and used for hot melt adhesive base material for random polypropylene.   The po film belongs to the medium melting point of hot melt film, melting point is about 110℃. PO hot melt film has high transparency, all models of products under it are relatively good low-temperature resistance, and high-temperature resistance is general.   Features of PO Hot Melt Adhesive Film Material: PO film   PO backing with high tensile strength   By heating & blow molding, formulate adhesive film   Excellent elongation ...
阅读全文