POLYETHYLENE TAPE WHITE

 Egret so-called polyethylene tape for aircon is used a lot for refrigerators or coolers. Normally is coated with natural rubber glue or water based acrylic adhesive. Plus, it has no liner. The base material is polyethylene. The material has very high elongation rate, extremely stretchable, and easy to tear. Because of this feature, it enables to stretch and conform to irregular surfaces.

 

Important to realize, it normally can take place aluminum foil tape, to attach the cooling tubes. Compared to aluminum foil tape, the cost of PE white tape is lower. On the other hand, white color is easy for you to recognize. Silicon coating on the back side is easy for you to release.

 

Polyethylene Tape White Specifications

 

Features of pe adhesive tape

2.4 mil (60 micron) polyethylene film with high tensile strengt

 

With silicone coating on PE non-adhesive side for easy release

 

Easy hand-tear or tear-resistance is available according to customer

 

Flexible PE material enables to stretch and conform to irregular surfaces

 

PE film color can be white or blue

 

Coated with high performance rubber adhesive

 

Natural rubber, synthetic rubber/resin, water acrylic adhesive available

 

Rubber adhesive has good bonding, removes without residue

 

Cost-saving alternative for aluminum foil tape in refrigerator application

 

Good aging resistance for both indoor & outdoor use

 

PE tape without liner ensures easy operating

 

FAQ of Polyethylene Tape White

What is a white polyethylene tape?

Polyethylene tape white aka polyester tape, high tensile low elongation, smooth and hard film.

 

01

What is white polyethylene tape used for?

Refrigerator, freezer, cooler evaporative coil/copper tube attachment

 

02

What is white polyethylene tape made of?

White polyethylene film and rubber or water acrylic adhesive

 

03

 

What color of PE tape do you have?

We have white color

 

For more information about industrial adhesive tape, please feel free to contact us!

 

If you are looking for a reliable adhesive tape factory, please contact u

 


评论

发表评论

此博客中的热门博文

FSK TAPE

图片
  FSK TAPE FSK tape is short name for foil scrim kraft tape. It is fire resistant, moisture barrier, very popular in thermal insulation industries. It is combination of aluminum foil, brown kraft paper, fiberglass scrims. It can used for wrapping the air ducts and laminating the glass wool or rock wool thermal insulation, duct board joints applications. It is a cheaper solution compared to other reinforced aluminum foil tape . Notably, it attaches well to rigid & flexible air ducts. Also, it is perfect vapor sealing for fiberglass facing joints. In addition, we have 2 way and 3 way directional scrims foil. As a result, it can meet with your variable requirements.   Features of FSK   A luminium T ape 4.8 mil (120 micron) 3 directional foil scrim kraft backing   Coated with aggressive synthetic rubber resin adhesive   Strong adhesion fit for sealing joints/seams of foil/scrim facing   Good at moisture or air penetration resistance   Good aging resist...
阅读全文

PET TAPE

图片
  Egret PET tape uses polyester film as the base material, the back of the base material is coated with release agent, and the front is coated with high viscosity rubber pressure sensitive adhesive. The main colors of products are white and blue. Pet is obtained by transesterification of dimethyl terephthalate with ethylene glycol or esterification of terephthalate with ethylene glycol to synthesize dihydroxyethyl terephthalate, and then polycondensation reaction. PET adhesive tape has good physical and mechanical properties in the temperature tolerance range, and the long-term temperature can reach 120°. Short-term temperature can reach -20°. The PET industrial adhesive tape has the characteristics of fatigue resistance, friction resistance and dimensional stability. Crystalline saturated polyester, milky white or light yellow, highly crystalline polymer, smooth and shiny surface, is a common resin in life.   Types of PET Tape There are 4 main PET tapes, including PET blue ho...
阅读全文

PO HOT MELT ADHESIVE FILM

图片
  The main component of Po hotmelt film  is PO, which is called polyolefin in Chinese. It is known to include polyethylene and polypropylene. Polyethylene is tasteless, non-toxic, has low-temperature resistant, and good chemical resistance. It can be polarized by graft copolymerization with other acids, thus changing the bonding properties. Polypropylene is divided into isotactic polypropylene C, interacted polypropylene, and random polypropylene, and used for hot melt adhesive base material for random polypropylene.   The po film belongs to the medium melting point of hot melt film, melting point is about 110℃. PO hot melt film has high transparency, all models of products under it are relatively good low-temperature resistance, and high-temperature resistance is general.   Features of PO Hot Melt Adhesive Film Material: PO film   PO backing with high tensile strength   By heating & blow molding, formulate adhesive film   Excellent elongation ...
阅读全文